sparkler filter press

Principle of Operation

Inquire Now

Horizontal Type Sparkler Filter Press

Incepted years ago in this domain, with a team of young Technocrat we are considered to be the leading manufacturer, supplier and exporter of Mechanical Filtration, for Pharmaceutical company. We are foremost organization involved in manufacturing Zero Hold Up Filter Press machine that are high in performance, low in maintenance, dimensionally accurate and breathe in quality and durability. Due to the outstanding features these are treasured all across the globe and are comprehensively used for crystal clear filtration of pharmaceuticals, chemicals, resigns, beverages, distillery, oil, ink and other industry.

Further the flow of the fluid in the filter is opposite to that of a standard filter. The impure fluid which is filtered enters the filter from bottom to the center channel and goes to the top of each plate. In this filter clear filtrate flow comes out from the opening on the side plate to shell and then to the outlet. This flow makes sure 100% filtration of the fluid compared to other standard flow type. In this process the filtration takes place without any hold and completes the filtration of the batch and does not require any scavenger arrangement. The filter machines are designed by expert engineers having diverse experience and goes with the international industry standards. Our esteem clients can avail these machines in standard configuration. This offered Zero Hold Up Filter Press guarantees reliable performance and has a good durability of its cloth and there is no requirement of the frequent change of the cloth.

Construction

The filters are made out of Stainless steel in S.S. 304, 316 & 316 L qualities.

The cartridge assembly consists of a number of disc type filter plates with perforated support screen, filter media and interlocking cups placed one on top of the other and supported at the bottom by a cartridge plate. The entire assembly is held together with the help of side tie rods which are of ‘T’ type construction for longer life.

The filter together with the pump and interconnecting piping is mounted on a sturdy base cladded with S.S. sheets and provided with castors for movability. The filter can also be supplied without pump, where external positive pressure is available.

Operation

The liquid to be filtered is passed into the vessel by means of the pump or other external means. The liquid then passes through the top of the filter plates from the holes provided at the side of the plate and onto the filter media. The liquid flows simultaneously and individually through all the member plates. Hence the output of the filter depends on the diameter and the number of plates. The filter media then retains the impurities in the liquid and the filtered liquid passes through the central channel to the outlet at the bottom.

The filters are optionally available with steam jacket for filtration of difficult liquids that solidifies at lower temperatures.

These types of filters are generally used for obtaining clear filtrate, but it can also be used to obtain the cake that is retained on the filter media, between the plaes.

SIZE
TYPE OF PUMP
MOTOR
TYPE OF SEAL
Ht. OF PLATES
FILTERING AREA
CAKE CAPACITY

FLOW RATE Ltrs / Hr.

8” Dia X 8 Plates
Gear

1 HP-1440

Oil Seal

25 mm

0.2 m Sq.

Ltrs.

450 – 500

8” Dia X 8 Plates
Gear

1 HP-1440

Oil Seal

25 mm

m Sq.

Ltrs.

600 – 700

8” Dia X 8 Plates
Centrifugal

1HP-2800

Mechanical*

25 mm

0.2 M Sq.

Ltrs.

450 – 500

8” Dia X 8 Plates

Centrifugal
1HP-2800

Mechanical*

25 mm

0.25 M Sq.

5.6 Ltrs.

600 – 700

14” Dia X 8 Plates

Centrifugal

2 Hp-2800

Mechanical*

38 mm

0.65 M Sq.

22 Ltrs.

1300 – 1500

14” Dia. X 10 Plates
Centrifugal 2 Hp-2800 Mechanical* 38 mm 0.81 M Sq. 27 Ltrs.

1500 – 1700

18” Dia. X 8 Plates

Centrifugal 3 Hp-2800 Mechanical* 50 mm 1.15 M Sq. 51 Ltrs.

2500 – 3000

18” Dia. X 12 Plates

Centrifugal 3 Hp-2800 Mechanical* 50 mm 1.72 M Sq. Ltrs.

4000 – 4500

18” Dia. X 15 Plates

Centrifugal 3 Hp-2800 Mechanical* 25 mm 2.15 M Sq. 40 Ltrs.

5000 – 5500

18” Dia. X 23 Plates

Centrifugal 3 Hp-2800 Mechanical* 25 mm 3.3 M Sq. 61.5 Ltrs.

8000-8500

33” Dia. X 7 Plates

Centrifugal 5 Hp-2800 Mechanical* 38mm 4.01 M Sq. 105 Ltrs.

9000-9500

33” Dia. X 10 Plates

Centrifugal 5 Hp-2800 Mechanical* 38mm 5.51 M Sq. 150 Ltrs.

12500-13000

33” Dia. X 14 Plates

Centrifugal 5 Hp-2800 Mechanical* 38mm 7.52 M Sq. 210 Ltrs

17500-18000

* – Mechanical Sal is provided with Tungsten carbide VS Tungsten Carbide face combinations.

Specification can be change as per Customers Requirments

Get a Quote Today

Give us an opportunity to serve you better